MOTOmed letto2
For early movilization and in the intensive care
Patients can use the MOTOmed letto2 to train the lower extremities in a passive, motor-assisted, and active mode, from a hospital bed or a therapy chair. The MOTOmed letto2 provides a well-rounded therapy to patients in stationary care. Here the legs from the patients have a safe position. It can also be effectively applied in in-patient use, during the dialysis and in the home care with the MOTOmed movement therapy in supine position. The huge transport roles make the bed model flexible. The spreadable chassis and a heigh adjustment simplify the adaption to beds and therapy chairs. The ground fixation allows a pleasant and fast positioning. The knee-bending is optimally adaptable with the knee flexion adjustment.
Usability – simple operation
Users navigate intuitively the colour display (display diagonal 5,7 inch) at the MOTOmed, because each next possible operating step is lightened in “green”. Tactile (small increased), large keys make the operation more easily. The large representation of the training information ensures a well legibility.
for an easy operation.
Easily legible display.
Simple start and stop of the MOTOmed.
The next logical step is indicated in green.
Pedals can be locked in the most conveniant position.
Properties
- Leg trainer
- pedal radius 7.0 cm
- big handlebar for an easy slide and positioning
- chassis with big castors and manual width adjustment
- Bed mount for a stable hold and a safe training
- pneumatic height adjustment
- horizontally adjustable toward the patient
- rotating operating panel
- MOTOmed SmoothDriveSystem with a gentle startup and rundown
- MovementProtector & SpasmControl
- speed regulation from 0 to 60 rpm (passive)
- regulation of motor power from 1 to 10
- preset a therapy duration from 0 to 120 minutes
- automatic device self test
- big, user-friendly operating panel; color code system and big, easy-feel buttons
- language selection between 27 different languages
- Dimensions (l × w × h cm) 118-129 × 70-100 × 124-155
- Weight 65 kg
- All-Metal construction
- Classification Protection Class II/Type BF,
- Classification according to MPG IIA
- Maximum permissible user weight 135 kg
- Screen Size 5.7"
Insertion Aid
The insertion aid function facilitates the insertion of the feet into the foot shells before the start of the training. Using a button on the operating panel, the user can move the foot shells continuously into the appropriate position.
MovementProtector
If muscle cramp, spasticity or movement blockage (freezing) occurs during training, this function stops the pedal movement. It does not matter how the basic muscle tension changes; the MovementProtector does not remain constant, but automatically adapts to any change. As a result, it always remains optimally sensitive. This function is implemented in all MOTOmed models through a sensitive sensor system.
SpasmControl
This function works closely with MovementProtector and can loosen and release detected spasms or cramps. The basis for the development of such a function is the following therapeutic principle: bending spasm is loosened by stretching and stretching spasm by bending. The automatic change of direction of rotation through the SpasmControl program can loosen the cramps detected by the movement protection. If a spasm occurs, the motor gently stops the crank movement. Legs and arms are relieved and the direction of rotation is switched following a brief resting period. This process is repeated until the spasm is relieved.
ServoCycling
Similar to a bicycle with an auxiliary motor, the MOTOmed function ServoCycling (leg training) or ServoTurning (arm training) supports users in performing their active movement. The function enables the person exercising to perform an active movement even with the lowest inherent forces. Residual muscle strength can be recognized and built up without overstraining efforts.
SymmetryTraining
The SymmetryTraining function unfolds its beneficial effect when it comes to specifically strengthening the weaker side. The display of the function differs depending on the model. In MOTOmed viva2, MOTOmed gracile12 and MOTOmed letto2 models, a two-scale diagram shows the users how much strength they exert with the left and the right body half. On the MOTOmed muvi as well as the MOTOmed loop edition and MOTOmed layson edition models, this function is displayed with an animated figure. Based on this graphic display, the users can target their "weaker" side of the body during training. SymmetryTraining prevents overloading of the healthy extremities.
Training analysis
All MOTOmed models provide the user with a variety of training feedback. Training values such as duration, distance, symmetry, total metabolic rate, tone, the average and maximum active performance as well as the active and passive training percentage can be viewed by the user on the screen both in real time during the training and as an overall evaluation after the training.
The complete package (hard- und software) consits of:
- software for MOTOmed sam2
item no. 206.000 - chip card reader
item no. 203.000 - two chip cards for leg and arm/upper body training
item no. 204.000 - chip card reader for your PC
item no. 205.010
- saves training data to the chip card
- reads individual training programs and MOTOmed control parameters from chip card
- saves data of multiple training sessions of one user
- saves individual therapy programs, program package and individual device settings
- holds and guides the legs safely
- prevents the knee joints from overstretching and blocking
- individual adjustment of the range of knee bending for both sides
- with plastic coated calf shells and disinfectable expanders
- easy and quick positioning in front of the dialysis chair or hospital bed
- the chassis width can be adjusted with a lever from 45 to 80 cm / 17.7 / 31.5 in.
- suitable for all common chairs and bed models
Cannot be retrofitted.
- to adjust the knee bending degree
- to set the ideal position without transferring the patient
- quick and easy adjustment - even with inserted legs and during operation
Cannot be retrofitted.
- polyurethane-made straps, width 5 cm / 2 in.
- for simple and effective cleaning and disinfecting
- in accordance with high hygiene standards
- plastic-coated safety foot shells with integrated ball knob for securing the fixation straps
- polyurethane-made straps, width 5 cm /2 in.
- simple and effective cleaning and disinfecting
- in accordance with high hygene standards
- allows for comfortable height adjustment of the unit, adjstable without any efforts by the nursing staff
- hydraulic system with foot pedal
- enables a fine regulation according to the individual training situation
Cannot be retrofitted.
- recommended for patients who are able to operate the menu independently
- increases patient motivation and activity by providing continuous feedback during training and data analysis at the end of each training session
- incl. large castors and locking against overexpansion of the pivot arm
Instead of the standard, rotatable holder for the control unit (replaces the patient switch included in the basic equipment).
